Metal Pipe Caps, Steel Pipe Caps for Nominal Pipe

Short Description

Model No.: HT CAP3 Hits: 21

Stock HengTong Pipe End Caps and Tube End Caps available in Carbon Steel, and Stainless Steel.
Request a quote Share

Key Specifications / Features

Our domed metal pipe caps are available in carbon steel, stainless steel and are made out of 10 gage material. Supplied with a mill finish. For additional sizes, materials, and finishes please call for pricing and availability or request a quote.
  • Pipe size: 8"
  • Outside diameter: 8.625"
  • Inside diameter: 7.981"
  • Wall thickness: 0.322"
  • Height: 4.000"
  • Standard wall
  • Schedule 40 (150#)
  • Round pipe cap
  • Beveled ends
  • Use with air, water, steam, oil & natural gas
  • Butt Weld steel pipe fitting
  • Meets ASTM A234 WPB & ANSI/ASME B16.9
Dimensions-of-steel-butt-welding-caps-ASME-B16.9


 
NPS OD, D Length, H Limiting Wall Thickness for Length, H Length, H1
 1/2 21.3 25 4.57 25
 3/4 26.7 25 3.81 25
1 33.4 38 4.57 38
1 1/4 42.2 38 4.83 38
1 1/2 48.3 38 5.08 38
2 60.3 38 5.59 44
2 1/2 73 38 7.11 51
3 88.9 51 7.62 64
3 1/2 101.6 64 8.13 76
4 114.3 64 8.64 76
5 141.3 76 9.65 89
6 168.3 89 10.92 102
8 219.1 102 12.7 127
10 273 127 12.7 152
12 323.8 152 12.7 178
14 355.6 165 12.7 191
16 406.4 178 12.7 203
18 457 203 12.7 229
20 508 229 12.7 254
22 559 254 12.7 254
24 610 267 12.7 305
26 660 267
28 711 267
30 762 267
32 813 267
34 864 267
36 914 267
38 965 305
40 1016 305
42 1067 305
44 1118 343
46 1168 343
48 1219 343
(1) Length H applies for thickness not exceeding that given in column “Limiting Wall Thickness for Length H.”
(2) Length H1 applies for thickness greater than that given in column “Limiting Wall Thickness” for NPS 24 and smaller. For NPS 26 and larger,length H1 shall be by agreement between the manufacturer and purchaser.

Products Related to Metal Pipe Caps, Steel Pipe Caps for Nominal Pipe